Night Owl 16BL-85GB - Manual (Page 39)

User’s Manual
37
5.2.9.2 PTZ
5.2.10 System
5.2.10.1 Date/Time
Click “MAIN”  “SYSTEM”  “DATE/TIME” to enter the TIME SETTING window to modify
system date, time, date/time format and time zone, DST (day saving time).
To configure the PTZ (Pan Tilt Zoom) function,
click “Main Menu”
 “Camera”  “PTZ”. The
cameras that come with the kit do not support PTZ
function, please refer to the user’s manual of your
PTZ cameras for proper settings. Please note the
channel settings must match the settings of the PTZ
camera.
• DATE: Enter the day, month, and year
• DATE FORMAT: Select YYYY/MM/DD, or
MM/DD/YYYY
• TIME: Enter the time
• TIME FORMAT: Use the drop-down menu and
select 12HOURS or 24HOURS
• TIME ZONE: Use the drop-down menu to select
the time zone you are in.
• NTP: Enable or Disable the Internet Time Server
Function.
• NTP SERVER: enter the address of the
international time server for periodic time update.
• DST: Use the drop-down menu to select ON/OFF
to enable/disable Daylight Savings Time.
When you click the DST Setting button in the
Date/Time menu, the DST STEEING menu will
open.
• Daylight Saving Time: Enable/Disable Daylight
Saving function.
• Time Offset: Enter the number of hours when
day light saving is active.
• Daylight Saving Time Mode: Select between
Week or Date depending on what day daylight
saving takes place.
• Start Time: The starting date of Daylight Saving.
• End Time: Set the date Daylight Saving ends.