Dee Zee DZ95721 User Manual
Page 9
Page 9 of 12
DZ 95721
2/15/13
Remove Tailgate from vehicle following
procedure in step 1.
Steel Washer
Nylon Spacer
Outer Cover
Reinstall outer cover by placing nylon
spacer and steel washer on bolt then
placing slotted flange onto bolt and
rotating the outer cover upwards.
A
1/2”
3/16”
A
Move the top of the outer cover
inwards. Reinstall hardware and
tighten in original location.
Ensure that when closing tailgate
for first time that there is a gap
between outside edge of outer
cover and truck bed.
* Driver side follows same steps as in
Passenger side Procedure.*
This manual is related to the following products: