Dee Zee DZ95721 - Manual (Page 6)

Page 6 of 12
DZ 95721 2/15/13
Tailgate installation is a reverse process of removing the
factory tailgate. Slide driver side tube hinge of the tailgate
on to the mounting pin of the bed. Lay back tailgate 30-45
degrees until notch in passenger side tailgate hinge is
parallel with the mounting pin. Slide tailgate hinge on to
mounting pin of the bed. Reattach cables to bed mounting
points. Close Tailgate.
5 Tailgate Installation
6 Striker Sleeve Installation
T50
Remove latch striker bolt shown to the right.
Passenger side shown.
After removal from truck the washer on the
striker bolt can unthreaded and the black
plastic sleeve can be removed. (H) TG-
FORDSTRIKERSLEEVE can be installed onto the
striker bolt and the washer threaded back onto
the bolt. Striker bolt can be reinstalled onto
truck
Black Plastic Sleeve
Washer
Striker Bolt
Washer
Striker Bolt
H