Dee Zee DZ43101 - Manual

FOR INSTALLATION ON DRIVER'S SIDE ONLY
PARTS LIST:
ITEM QTY
THREAD LOCK TUBE 1
SHOCK 1
CABLE/BALL MOUNT 1
WASHER 1
BALL MOUNT PLATE 1
BOLT 1
NUTSERT TOOL 1
NUTSERT 1
GROMMET 1
TOOLS REQUIRED:
10MM WRENCH
11mm WRENCH
13MM WRENCH
M4 ALLEN WRENCH/SOCKET
M5 ALLEN WRENCH
TAPE MEASURE
PLIERS
NOTE: THIS PRODUCT CAN ONLY STEP 2) STEP 3)
BE INSTALLED ON THE Using a M5 Allen wrench and Mark one side of the nut and Apply thread lock to the threads
DRIVER'S SIDE. a 10mm wrench, install the count the number of revolutions on the bolt.
nutsert in the opening by the to insure the correct number Install the ball mount plate by
STEP 1) tailgate pivot point. of full turns. threading the bolt through the
Adjust the nutsert tool so Overtightening the nutsert plate into the nutsert.
there is 3/4" from the washer can strip the threads and cause Tighten with M4 allen.
to the head of the bolt. the nutsert to be unusable. Torque to 8 ft-lbs.
Remove the nutsert tool
when installation is complete.
The nutsert should be tightened 9
360 degree turns.
DZ 43101
TAILGATE ASSIST
CHEVY 2007-2011
DO NOT TURN
DZ 43101 9/25/2013