Dee Zee DZ950531B User Manual
Page 7
If the inner rail of your bed is not flat, you will need to use the spacer [N] to fill the gap between the
bed rail and the brace. If the inner rail is flat, the spacer is not needed and may be discarded.
5
Using the slot in the brace as a guide, drill a 9/32" holes through the spacer (if used) and the
bed rail. You may need to push down on the top of the brace when drilling to close any gap
between the brace and the top of the bed.
PS STEEL CAB RACK BKT
6 OF 7
10/12/2011