Dee Zee RAM-VB-178-SW1 User Manual
Ram no-drill, Seat bases, Vehicle base for the
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
SPECIFICATIONS
Placement
Passenger side on the floor, at front of seat
Drilling Required
No - uses existing seat bolt holes
Seat Configuration
Bucket / Split Bench
Construction/Finish
Steel/Black Powdercoat
Dimensions
Pole or Pedestal
Sold Separately
Weight
2.1 lbs.
A = 14.75", B = 3.8", C = 1.75”
Hole Center = 13.25”
Features
Shown In Use
Misc.
Installs in minutes with no drilling required
Low profile keeps mount away from passenger leg space
Won’t interfere with levers or factory-installed console or 4WD lever
Designed to accommodate trucks with PTO or under seat air duct.
Rock solid construction
Lifetime warranty
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-178
RAM-VB-178
DODGE RAM 1500 to 5500 TRUCKS
(2008-NEWER)