Dee Zee DZ502245 - Manual (Page 6)

GRILLE GUARD
06-08 DODGE RAM 1500
Page 4 of 5 6/11/09 Rev2(DP)
Passenger Side Installation Pictured
Front
Crossmember
Passenger/right Frame
Mounting Bracket
12mm x 35mm Hex Bolts
12mm x 32mm OD x 3mm
Flat Washers
12mm Nylon Lock Nuts
Fig 5
12mm x 35mm Hex Bolts
12mm x 24mm OD x 2.5mm
Flat Washers
12mm Nylon Lock Nuts
Fig 6 Fig 7
Bolt the Grille Guard Mounting
Brackets to the inside of the
Grille Guard with:
(2) 12-1.75mm x 35mm Hex
Bolts
(4) 12mm x 24mm OD x 2.5mm
Flat Washers
(2) 12mm Nylon Lock Nuts
Grille Guard
Mounting Bracket
Start Grille Guard installation by inserting (1 per
side) Hex Bolt with hardware in the rear-most
mounting holes first to act as a hinge.
Tilt the Grille Guard up into position and install
remaining hardware
Use the factory hardware
to attach the Frame
Mounting Brackets