Fender – Dee Zee DZ17941 User Manual

Page 3

Dee Zee Mudflap Installation Instruction

DZ 17941

(1999 - Current) Chevy P/U (Rear)

#8 x 3/4”

Round Washer

Screw

X1 Set

Rubber

Mudflap

1/4” Flat

Washer

Tools Required:

Drill with a

1/8” drillbit

PN 704

PN 72B

Fender

3M Protective

Film Location

3M Protective Film Installation:

Dee Zee mudflaps are designed to fit snugly into the wheel well. To protect your vehicle,

Dee Zee has included a 3M protective film.

1) Hold the mudflap up to wheel well to determine 3M protective film placement.

2) Thoroughly clean the area where the film is to be installed using 3M brand adhesive cleaner

or other petroleum distillate based cleaner.

3) Cut the film to the proper shape for your application.

4) Mix a solution of water and dishwasher detergent into a spray bottle.

5) Remove film from the protective liner and spray with the water solution.

6) Apply the film to the fender, adhesive side down and spray total area with water solution.

7) Remove any air bubbles in film using a wet sponge.

8) Let film dry completely before installing mud flap.

Short Phillips Screwdriver

3M Protection

Film (10”)

(Cut in half)