Dee Zee DZ3378 - Manual (Page 5)

Insert the support brace [D] into the opening at the front box support and attach to the brace
using the 3/8" bolt [O], two 3/8" washers [P], and a 3/8" nut [Q].
Attach the lower hole in the brace through the sheet metal using a 3/8" bolt [O],
3/8" washer [P], and the threaded plate [N].
3/8" washer [P], and the threaded plate [N].
Back side of mounting location.
Tighten the upper bolts using a M8 allen wrench and 9/16" socket and wrench.
Tighten the lower bolts using a 9/16" socket and wrench.
DZ 3378 3 OF 10 12/15/2011