Dee Zee FX21934 - Manual (Page 8)

Page 8 of 12
FX 21934 / FX 21334 04/22/08
Place an 8mm U-clip (O) onto the rocker panel bracket (E) as shown below.
7a-Place the rocker panel bracket up to the 8mm U-clips installed into the rocker panel and
secure into place using the 8mm X 25mm hex flange bolts (N). Secure the bottom of the
rocker panel bracket to the bottom of the rocker panel using 8mm x 25mm hex flange bolts
(N). Tighten into place using a 13mm wrench / or socket.
7b – Use the bottom hole in the Rocker Panel Bracket (E) as a guide to drill a 3/16” hole
through the inside of the rocker panel. Secure the bottom of the rocker panel bracket to the
rocker panel using the 8mm U-clips (O) installed into the rocker panel and secure into place
using the 8mm X 25mm hex flange bolts (N)
6
7a
3/16” DRILL BIT