Dee Zee FX21934 - Manual (Page 11)

Page 11 of 12
FX 21934 / FX 21334 04/22/08
Using the pictures below as a guide, first drill three 1/8” holes through the mudflap on the
running board and the sheet metal in the wheel opening of the vehicle. Secure the mudflap to
the sheetmetal of the wheel well opening using #10 x 5/8” phillips head screws (Q) as shown
in step 11 of this instruction. Tighten until snug using a phillips head screw driver. Now drill a
1/8” hole through the bottom of the mudflap and the fx running board as shown below. Secure
the mudflap to the bottom of the fx running board using #10 x 5/8” phillips head screws (Q) as
shown in Step 11 of this instruction.
10