Dee Zee DZ2034 - Manual (Page 8)

Page 8 of 9
DZ 2034 04/17/08
Place britetread running board (A) up to the running board brackets (D) as shown below.
Slide britetread running board up to the rocker panel so that it is flush with the vehicle rocker
panel.
Using the bottom holes in the running board brackets (D) as a guide, drill 1/4” holes
through britetread running boards. Secure the running board bracket (D/E) to the britetread
running board using 1/4” x1” Ribneck carriage bolts (E), 1/4” Flange Hex nuts (J). Tighten into
place using a 7/16” wrench / or socket.
6
Britetread
Running
Board
Running
Board
Bracket
Rocket
Panel
Bracket
7
1/4” DRILL BIT
E
J