Dee Zee DZ1061 - Manual (Page 8)

Slide the open end of the slot in the driver side brace [B] over the 8mm bolt.
Attach the bottom mounting location using the 8mm bolt [E].
Tighten the 8mm bolts using
a 13mm wrench.
Repeat this for all of the mounting locations.
Repeat these step on the passenger side using the passenger side bracket [C].
If you have an HD diesel and installed the brace in steps 1-3, then you will only use bracket [C]
in the middle and rear locations. The middle passenger location will be right next to the DEF tank.
You will need and open end wrench to fit between the DEF tank and the pinch weld to tighten the top bolt.
7
DZ 1059 6 of 10 4/24/2014