Dee Zee DZ1061 - Manual (Page 6)

Locate the bracket mounting locations on the inside of the rocker panel. Shown below is the driver
side of the crew cab. The front of the vehicle is to the right side.
NOTE:
For regular cab
trucks there will not
be a middle mounting
location.
Depending where your vehicle was manufactured, the front and middle top mounting locations
may have weld nuts instead of open hole. If this is the case, the bolt will thread into the weld nut
and the clip will not be used.
4
DZ 1059 4 of 10 4/24/2014