Dee Zee DZ16241 - Manual (Page 11)

Line the bolts in the running board up with the slots in the braces.
Place the board on the braces with the bolts through the brace slots.
Slide the board to the desired location from front to rear. A tape measure may be used to insure
the board is centered between the wheel wells. Slide to board in/out on the brace slots to place
the board an even distance from the vehicle.
10
11
the board an even distance from the vehicle.
Attach the board to the braces using the flange nut [K]. Tighten all bolts with a 13mm socket.
Repeat process for passenger side.
DZ 16241 9 OF 9 2/22/2012