Dee Zee DZ16213 - Manual (Page 7)

Slide two square heade bolts [H] into the channels on the unerside of the running board.
Place the running board onto the braces. Align the 8mm square head bolts installed in the previous
step with the slots in the brackets. Once the board is on the brace, completely tighten the board
to the main brace. Center the board between the wheel well using a tape measure. Slide the board
in/out as needed to properly line up with the vehicle. Secure the board to the braces using the
8mm flange nuts [F].
Repeat these steps for the passenger side.
4
5
DZ 16213 5 of 5 6/13/2013