Dee Zee DZ372299 - Manual (Page 6)

3"/4" BENT END SIDEBARS
09-11 FORD F-150 REGULAR AND SUPERCAB
Page 5 of 5 11/19/08 (DP)
1/2” x 2” Hex Bolts
1/2” Lock Washers
1/2” Flat Washers
12mm Bolt Plate with
Plastic Retainer
12mm Flat Washer
12mm Lock Washer
12mm Hex Nut
10mm x 35mm Hex Bolt
with Plastic Retainer
(2) 10mm Flat Washers
10mm Lock Washer
10mm Hex Nut
Rear bolt on Rear Mounting Bracket
pictured from outside of vehicle. Place the
Plastic Washer between the 10mm Flat
Washer and the painted surface of the
truck body
Fig 8A
Super Cab rear mounting location
pictured. Insert the Bolt Plate in through
the large hole and back out through the
smaller hole in the body then thread the
Plastic Retainer onto the Bolt Plate
Regular Cab rear mounting location
pictured. Thread the Plastic Retainer onto
the Bolt Plate then insert the Bolt Plate into
the large hole in the body. Continue to
thread the Plastic Retainer down until it is
snug against the body
Regular Cab complete installation Super Cab complete installation
Fig 6
Fig 7
Fig 8B
Rear
Rear
Rear