Monoprice 9466 USB Gigabit Ethernet Adapter - Manual (Page 5)

1. Introduction
1
1. Introduction
This Gigabit USB 2.0 Ethernet adapter is a cost effective solution that converts a
USB port into a 10/100/1000Base-T Ethernet port. It enables low cost and
affordable Gigabit Ethernet network connection to desktop, notebook PC, and
embedded system using popular USB ports. No need to purchase an expensive
Gigabit network interface card and to spare a PCI or Cardbus slot, just using your
existing USB ports and you can upgrade your network connection speed.
Features
 Supports 10/100/1000 Mbps auto-sensing capability.
 Supports Auto MDIX (straight and cross network cable auto-detection).
 USB specification 1.0, 1.1 and 2.0 compliant.
 Supports USB full and high speed modes with bus power capability
 IEEE 802.3, 802.3u, and 802.3ab (10Base-T, 100Base-T, and 1000Base-T)
compatible
 Supports both full-duplex and half-duplex operation in Fast Ethernet
 Supports Jumbo packet of up to 9KB
 Supports suspend mode and remote wakeup via link-up and magic packet
Package Contents
Before installation, please check the items of the package.
 Gigabit USB 2.0 Ethernet Adapter x1
 Driver CD x1
 Quick Installation Guide x1