Standard equipment and specifications, A) maximum lift height at pivot pin 111, B) maximum height under bucket 107 – Alamo 3109 User Manual
Page 49: C) clearance with bucket dumped 93, D) reach at maximum height 24, E) maximum dump angle 42, F) reach with attachment on ground 62, G) attachment rollback angle 20, H) digging depth 5.5, Standard equipment and specifications -3
OPERATION
3109 01/11
Operation Section 4-3
© 2011 Alamo Group Inc.
OPERA
T
ION
1.
Standard Equipment and Specifications
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 68” pin on bucket, external hydraulic system of 10 GPM with engine operating at 2600 RPM
and relief setting of 2500 PSI.
Horsepower Range
30-50 HP
System pressure/flow rate
2500 PSI/ 10 GPM
Lift Capacity to maximum height
1320 lbs.
Breakout force at pivot pin
4410 lbs.
Rollback force at ground line
3030 lbs.
Total weight with bucket (approx.)
980 lbs.
Raising time to full height
4.97 seconds
Lower time
3.42 seconds
Attachment dump time
2.47 seconds
Attachment rollback time
3.19 seconds
Hydraulic system flow
10 GPM
System pressure at rated flow
2500 PSI
(A)
Maximum Lift Height at Pivot Pin
111”
(B)
Maximum Height Under Bucket
107
(C)
Clearance with Bucket Dumped
93”
(D)
Reach at Maximum Height
24”
(E)
Maximum Dump Angle
42°
(F)
Reach with Attachment on Ground
62”
(G)
Attachment Rollback Angle
20°
(H)
Digging Depth
5.5”
(I)
Overall Height in Carry Position
56” @ top of upright
(Manufacturers estimated specifications and design subject to change without notice.)