Monoprice 4562 Wall Mount Bracket - Manual (Page 3)

Step 2 Mounting the Monitor Bracket Frame to a TV
The arrangement of the TV mounting rails (part 2) will depend on the horizontal distance between the mounting holes on the back of
your television. Before attaching the vertical TV mounting rails to the television, please determine which setup is appropriate for your
television in order to determine the proper placement of the retention clamps (part 5).
Case A.
If the mounting holes on your television are 54 to 235mm.
TV mounting rails will go inside of the extension arm plate and
retention clamps go on outside of the rails.
Case B.
If the mounting holes on your television are 235-257mm.
TV mounting rails will go inside the extension arm plate and
retention clamps go on the inside of the rails.
Case C.
If the mounting holes on your television are 346-683mm.
TV mounting rails will go outside the extension arm plate and the
retention clamps go outside the rails.
Case D.
If the mounting holes on your television are 683-705-257mm.
TV mounting rails will go outside the extension arm plate and the
retention clamps go on the inside of the rails.
Make sure one of the machine bolt sizes fits the
mounting holes on your television.
Once you have selected the correct size bolt,
attach the rails to the television with the
retention clamps slid onto the horizontal frame
rod (part 4) at the appropriate location. Use
four machine screws to attach the rails to the
television, 2 per rail.