BBK Performance 2523 User Manual
Page 2
INS139
STEP 3 Remove front and rear 18mm control arm mounting bolts and remove
control arm from the car.
STEP 4 Install new lower arm with stock bolts. Tighten bolts to 129ft-lbs.
STEP 5 Loop e-brake cable under arm and reconnect it to the caliper
actuating arm.
STEP 6 Reinstall cable retaining clip.
STEP 7
Repeat for opposite side.
NOTE
Apply the parking brake firmly before lowering the car from the
jack stands!
Release seat bottom Remove front bolt
Remove brake cable clip Disconnect cable from caliper
Pull cable through control arm
See also other documents in the category BBK Performance For the car:
- 1505 (2 pages)
- 15050 (1 page)
- 1712 (1 page)
- 1735 (1 page)
- 1736 (2 pages)
- 1747 (1 page)
- 17685 (7 pages)
- 1734 (1 page)
- 1733 (2 pages)
- 1785 (1 page)
- 1738 (2 pages)
- 17385 (2 pages)
- 1771 (1 page)
- 1831 (4 pages)
- 1768 (7 pages)
- 1556 (1 page)
- 1100 (2 pages)
- 1720 (2 pages)
- 1100A (2 pages)
- 1726 (1 page)
- 4009 (4 pages)
- 1612 (2 pages)
- 4012 (1 page)
- 4010 (1 page)
- 1442 (2 pages)
- 1594 (1 page)
- 1516 (1 page)
- 1531 (1 page)
- 1532 (1 page)
- 1641 (3 pages)
- 1633 (6 pages)
- 1632 (4 pages)
- 4008 (1 page)
- 1512 (1 page)
- 3510 (1 page)
- 1596 (1 page)
- 1595 (1 page)
- 1615 (1 page)
- 4007 (1 page)
- 3515 (1 page)
- 1634 (1 page)
- 1786 (1 page)
- 1538 (1 page)
- 1671 (1 page)
- 1661 (1 page)