BBK Performance 14420 User Manual
Tuned length headers, Special tools required, Install time
2011-2014 Ford Mustang V6
Tuned Length Headers
Part # 1442, 14420
1
INS-197
Special Tools
Required:
• No special tools
required
Install Time:
Approximately
1 Hour
Difficulty:
3 out of 5
Follow these instructions carefully to ensure correct fitment and operation.
STEP 1
STEP 2
STEP 3
•
Disconnect the negative battery terminal, then
raise and support the vehicle using jack stands
or a car stand.
•
Remove the heat shields on the exhaust
manifolds. Remove the 6 nuts securing each
exhaust manifold to the cylinder head. Remove
the Header and Gasket from the vehicle.
NOTE!!! These manifolds can be removed
from the top of the engine compartment.
•
Unbolt the factory x-pipe from the exhaust
manifolds and let it hang down. This will aid in
tightening the passenger side BBK Header.
Removing this bolt will free the coolant line secured to
the engine and aid in space for tools to remove and
install the headers.
There are 3 nuts on the top and bottom of both driver
side and passenger side exhaust manifolds.