Actron CP9575 - Manual (Page 6)

6
The Tool automatically reads Codes and I/M Monitors and dis-
plays the data. When done viewing data, press  BACK key to
return to Main Menu.
Diagnostics Menu User Interface
To select functions:
1. From the Diagnostic Menu,
press the  READ
or  ERASE arrow key until
the desired function is
highlighted, then press the
ENTER key to retrieve
and display the results.
2. When complete, press 
BACK to return to the Diag-
nostic Menu selection screen.
Read Codes
To read the codes:
⇒ Press and hold the  READ key for 2 seconds then release it, or
Select Read Codes from Diagnostic Menu.
When viewing codes, the Tool displays Confirmed, Pending, and Perma-
nent Codes. Confirmed Trouble Codes are reported when a component,
sensor, or other part of the vehicle is indicating a malfunction is present.
The malfunction must be present for a sufficient amount of time before
the vehicle records and the Tool displays a Confirmed Trouble Code.
Confirmed codes are indicated by the CONFIRMED icon.
Pending Codes are only reported if a problem occurs during the cur-
rent or last completed drive cycle. Pending Codes do not necessarily
indicate a faulty component or system. Pending Codes convert to
Confirmed Trouble Codes when an emissions problem persists long
enough to be considered a real problem, not an anomaly. Pending
Codes are indicated by a PENDING icon.
Permanent Codes are special confirmed code. Permanent Codes
began being reported by vehicles beginning around 2010, so they are
not supported by every vehicle. While Confirmed Codes can be erased
by the tool, Permanent Codes cannot. Permanent Codes are erased
by the vehicle when the vehicle has determined the fault is no longer
present. Permanent Codes are indicated by a PERMANENT icon.
DIAGNOSTIC MENU
====================
Read Codes
Erase Codes
MIL Status
State OBD Check
View Data
View Freeze Data
^^

