Telenav for Nextel Supported Devices: v2.1 for Motorola i88s, i58sr, i95cl - Manual (Page 25)

© TELENAV 2003-5 PAGE 25 OF 30
TeleNav not available
If you get an advisory message that TeleNav is not available, you should EXIT the application, check
the cable from the TeleNav GPS receiver to the phone, and then restart the TeleNav application. If the
problem recurs, it may be due to a temporary server outage.
GPS Errors
GPS not responding or GPS Malfunction
If the GPS receiver is malfunctioning or otherwise not in working order you will see the following error:
To remedy this problem, EXIT the application, turn the phone off and then restart the phone. If this does
not fix the problem please contact TeleNav at 408-404-7447. Until the problem is corrected, use the
non-GPS directions.
Error message: GPS Access Restricted (i88s and i58sr only)
FIX: To change the privacy setting so that TeleNav can access the GPS, first EXIT the application, and
then follow the directions provided above in the GPS Privacy Settings section.
Error message: GPS Signal Weak
Another situation may advise you that TeleNav is trying to acquire the GPS signal. If the GPS receiver
has not been used recently, it may take a few minutes before the GPS receiver can locate the satellite
signals, demodulate the data it needs, and produce a location fix. If the GPS receiver is connected and
working, but signal reception is weak due to shadowing within the vehicle or due to buildings, trees,
overpasses, etc., validation will fail, producing the following advisory screen.