Symetrix AXIOMTEK 10.4 Touch Panel PC - Manual (Page 48)

GOT-5100TL User’s Manual
Phoenix-Award BIOS Utility 40
3.10 PnP/PCI Configuration Setup
This section describes the configuration of PCI (Personal Computer
Interconnect) bus system, which allows I/O devices to operate at
speeds close to the CPU speed while communicating with other
important components. This section covers very technical items that
only experienced users could change default settings.
l PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play
aware (e.g., Windows 95). The default value is “No”.
l Init Display First
This item allows you to decide whether PCI Slot or AGP to be the
first primary display card.
l Reset Configuration Data
Normally, you leave this item Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup
or if installing a new add-on cause the system reconfiguration a
serious conflict that the operating system can not boot. Options are:
“Enabled, Disabled”.