Symetrix AXIOMTEK 10.4 Touch Panel PC - Manual (Page 32)

GOT-5100TL User’s Manual
Phoenix-Award BIOS Utility 24
CHPATER 3
PHOENIX-AWARD BIOS UTILITY
The Phoenix-Award BIOS provides users with a built-in Setup program
to modify basic system configuration. All configured parameters are
stored in a battery-backed-up RAM (CMOS RAM) to save the Setup
information whenever the power is turned off.
3.1 Entering Setup
There are two ways to enter the Setup program. You may either turn
ON the computer and press immediately, or press the
and/or , , and keys simultaneously when the following
message appears at the bottom of the screen during POST (Power on
Self Test).
TO ENTER SETUP PRESS DEL KEY
If the message disappears before you respond and you still want to
enter Setup, please restart the system to try it again. Turning the
system power OFF and ON, pressing the “RESET” button on the
system case or simultaneously pressing , , and keys
can restart the system. If you do not press keys at the right time and the
system doesn’t boot, an error message will pop out to prompt you the
following information:
PRESS TO CONTINUE, OR TO ENTER SETUP