Sper Scientific 810038 Talking Timer User Manual
Sper scientific

Alarm Sound
Symbol
Whistling Tea Pot
Cuckoo
Bell
Bouncing Ball
Car Horn
Beeps
SPER
SCIENTIFIC
TALKING TIMER, 810038
INSTRUCTIONS
INTRODUCTION: Features include a talking count
down timer, a count up timer and a talking clock. These
functions are independent and will operate either
separately or simultaneously. In addition, choose from
six different alarm sounds. The timer’s memory feature
allows you to store your most frequently used count
down time. An automatic repeat function allows you to
restart any count down as many times as desired. This
feature is particularly useful for repetitive activities such
as checking experiments at regular intervals. The timer
is designed with an easel back for desktop use, a
magnet for attaching to metal surfaces, and a clip for
belt attachment.
FIRST USE: Slide open the battery compartment lo-
cated beneath the belt clip and remove the plastic tab
between the battery and the contact point.
ACTIVATE VOICE ANNOUNCEMENTS: Place fingers
on the side grooves near the bottom and gently slide
the cover down and then backwards. This reveals the
Repeat Yes/No, Voice On/Off and Sound buttons.
•
To turn the voice announcements off, press the
VOICE ON/OFF button. This icon is displayed:
•
The alarm will still sound when the count down
reaches 0.00oo.
•
3. To turn the voice announcements back on,
press VOICE ON/OFF again and the icon disap-
pears.
SELECTING THE ALARM SOUNDS: The alarm only
plays during count down. It does not play in clock mode
or when the timer is counting up.
•
Slide the side FUNCTION switch to Count Down.
•
Press SOUND repeatedly to choose the alarm.
The unit will play each sound and display its corre-
sponding symbol. There are six different sounds:
SETTING THE COUNT DOWN TIME
•
Slide the side function switch to COUNT DOWN.
•
Press the HR, MIN, and SEC buttons to set the
hours, minutes, and seconds for the count down