Sper Scientific 840099 Datalogging Manometer - Manual (Page 18)

18
SOFTWARE CONFIGURATION
Figure 2.
Com Port
1. Select the Com port and ensure that the meter is com-
municating with the PC.
2. The selected Com port is dis-
played in the bottom-left hand
corner of the software screen.
3. When connected, “PC Mode” and the Com port number
(1-8) are displayed on the meter.
Com1
Command Options
There are four (4) command options supported by the soft-
ware. Choose the correct mode before uploading or down-
loading data.
(see Figure 3)
1. Download Memory Data
2. Download Logger Data
3. Download All Data
4. Upload Memory Description