Sper Scientific 840099 Datalogging Manometer - Manual (Page 13)

13
MEASUREMENT PROCEDURES
4. Press F4 (ENTER) after modifying a parameter.
5. Once the parameters have been set press F4 (NEXT)
and F1 (START) to start the auto logger. The word
“Logging…” will be displayed.
 The meter will automatically start and stop logging ac-
cording to your chosen parameters. Once the required
number of data points is reached, logging stops and the
records are held in the data logger.
6. During the auto logging press F2 (MEAS) to take a real-
time reading or F4 (VIEW) to view memory record.
7. To stop auto logging press F1 (STOP).
8. Use the ▲ and  buttons to scroll through the memory
records.
9. Press F4 (NEXT) to access the previous and next page
buttons. Press F1 (P-PG) or F2 (N-PG) to review previ-
ous or next 100 data points.
10. Press F4 (BACK) to access the auto log main menu and
press F2 (Start) to continue auto logging or F1 (EXIT).