Sper Scientific 800037 WBGT Heat Stress SD Card Logger - Manual (Page 13)

- 13 -
SETUP MODE
Decimal Type
Although the decimal is commonly
expressed as the “.” symbol (i.e., 20.6 or
1000.53), some (European) countries use
a “,” symbol to represent the decimal (i.e.,
20,6 or 1000,53). The meter defaults to
the period symbol. To adjust:
1. Enter the decimal type function from
Setup Mode (see page 11). “dEC”
appears on the LCD.
2. Press ▲ or ▼ to select Basic (.) or
Euro (,). Press ENTER to save the
selection.
Auto Power Off
The meter automatically turns off after 10
minutes of inactivity, however this function
can be disabled.
1. Enter the auto power off function from
Setup Mode (see page 11). “PoFF”
appears on the LCD.
2. Press ▲ or ▼ to select yes (auto
power off enabled) or no (auto power
off disabled). Press ENTER to save
the selection.
Touch-Tone
1. Enter the touch-tone function from
Setup Mode (see page 11). “bEEP”
appears on the LCD.