Sper Scientific 800037 WBGT Heat Stress SD Card Logger - Manual (Page 12)

- 12 -
SETUP MODE
Real Time Clock
1. Enter the clock function from Setup
Mode (see page 11). “dAtE” appears
on the LCD.
2. Press ENTER. The year will flash on
the LCD.
3. Press ▲ or ▼ to adjust the value.
Press ENTER to save the value.
4. Repeat Step 3 to adjust the month,
date, hour, minute and second.
Note
This procedure adjusts the meter’s internal
clock. The internal clock will function
when the meter is turned off but only when
the batteries have adequate power (not
with low battery power.)
WBGT Alarm
1. Enter the WBGT alarm function from
Setup Mode (see page 11). “AL”
appears on the LCD.
2. Press ▲ or ▼ to adjust the WBGT
alarm value. Press ENTER to save the
value.
Note
The alarm will sound when the WBGT
measurement exceeds the set WBGT
alarm value.