Sper Scientific 850024 Hot Wire Anemometer SD Card Logger - Manual (Page 17)

17
MEASUREMENT PROCEDURES
Maximum and Minimum
To record maximum and minimum readings:
1. When measuring any parameter, press REC to begin
recording the maximum and minimum values. “REC”
appears on the LCD.
2. Press REC. The maximum value and “REC MAX” will
appear on the LCD.
3. Press REC. The minimum value and “REC MIN” will
appear on the LCD.
4. To delete the maximum or minimum value, press HOLD.
“REC” appears on the LCD and the meter will begin
recording the maximum and minimum values again.
5. To exit the min/max function, press and hold REC
for 2 seconds or longer. The meter will return to
Normal Mode.
Note…
The meter cannot be turned off from the memory record
function. Exit the function, then press and hold POWER to
turn the meter off.