Sper Scientific 850024 Hot Wire Anemometer SD Card Logger - Manual (Page 11)

11
SETUP MODE
Real Time Clock
1. Enter the clock function from Setup Mode
(see page 10). “dAtE” appears on the LCD.
2. Press ENTER. The year will appear on the LCD.
3. Press ▲ or ▼ to adjust the value. Press ENTER to
save the value.
4. Repeat Step 3 to adjust the month, date, hour, minute
and second.
Note…
This procedure adjusts the meter’s internal clock. The
internal clock will function when the meter is turned off but
only when the batteries have adequate power (not with low
battery power.)
Decimal Type
Although the decimal is commonly expressed as the “.”
symbol (such as 20.6 or 1000.53), some (European)
countries use a “,” symbol to represent the decimal (such as
20,6 or 1000,53). The meter defaults to the period symbol.
To adjust:
1. Enter the decimal type function from Setup Mode
(see page 10). “dEC” appears on the LCD.
2. Press ▲ or ▼ to select Basic (.) or Euro (,).
Press ENTER to save the selection.