Speedtech 70-81 Camaro Torque Arm User Manual
Page 4
4 |
P a g e
3. U
sing two ½ x 2” sleeves, the ½”x 4.5” bolts, ½” stover nuts and the black
aluminum spacer, install the articulink lower trailing arms into the leaf spring
pockets with the small sticker indicating D (driver) or P (passenger) at the front.
Do Not completely tighten the bolts at this time as they use stover lock nuts and
you will be removing them again later in the installation. The spacers should be
installed towards the outside of the car and grease fittings should point
downward. Install the spring pocket and trailing arm assemblies back into the car
and snug the bolts.