SIGMA PC 26.14 User Manual

Page 3

1.2 Button functions

the PC 26.14 has five buttons:
toGGLe/-, toGGLe/+, StoP, StArt, and enter

STOP button:

this button takes you back a level
within the menu structure. In training
mode, stop the training session by
pressing this button.

Resetting training data without
saving: Press and hold the StoP
button.

TOGGLE/- and
TOGGLE/+ buttons:

toGGLe/+ enables you to navigate to the
right in the main menu; toGGLe/- takes
you back again. If you are at a point at which
values can be configured, use toGGLe/+
to set a higher value and toGGLe/- to set
a lower value.

Activating/deactivating the light mode
Press the toGGLe/- And toGGLe/+
buttons simultaneously. Pressing the
buttons simultaneously a second time
switches the display backlight off again.
the light stays on for approx. three seconds.

START button:

Press the StArt button to start
training.

Pressing the StArt button again
while training marks a lap.

If you have paused a training
session by pressing the StoP
button, you can restart the timer by
pressing the StArt button again.

Lap view:
Press and hold the StArt button.
Press the StoP button to exit
lap view.

ENTER button:

Use this button to access the main
menu and confirm the entries.

You can navigate in the submenu
of the applicable menu item and
access any further sub-items
available.