ADC TrueNet F/UTP Riser Cable - Manual (Page 2)

4/08
•
104744AE
CopperT
en
®
Four
Pair
F/UTP
Riser
Cable
2 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
TrueNet ®
CopperTen ® Four Pair F/UTP Riser Cable
Specifications
CONSTRUCTION
Conductor:
23 AWG solid bare copper
Insulation: HDPE
Separator: HDPE
Shield: Aluminum/polyester foil
Drain Wire: Stranded tinnned copper
Jacket: Lead free, flame retardant PVC
Nominal O.D.: .280" (7.1mm)
COMPLIANCES
UL Subject 444
(UL)-C(UL) Type CMR
ICEA S-90-661
NEC 800 Type CMR
TIA/EIA-568-B.2-1 Category 6 Horizontal Cable Requirements
TIA/EIA-568-B.2-10 Augmented Category 6 Horizontal Cable Requirements
ISO/IEC 11801 Category 6 Horizontal Cable Requirements
ISO/IEC 11801 Category 6a Horizontal Cable Requirements
COMMON APPLICATIONS
4/16 Mb/s Token Ring (IEEE 802.5)
52/155 Mb/s ATM (ATM Forum)
10BASE-T (IEEE 802.3) 622 Mb/s ATM (ATM Forum)
100 Mb/s TP-PMD 1000BASE-T (Gigabit Ethernet)
Broadband & Baseband Video 1 Gigabit Networking System (WGNA)
100BASE-T (“Fast Ethernet”) 1.2 Gb/s ATM (ATM Forum)
100BASE-T4 (“Fast Ethernet”) 77 Channel Broadband Video
100BASE-TX (“Fast Ethernet”) 10GBASE-T Ethernet (IEEE 802.3an)
100VG-Any LAN (IEEE 802.12)
THERMAL CHARACTERISTICS
Transport and Storage:
-10°C to 60°C
Installation: 4°C to 50°C
Operation: -10°C to 60°C
MECHANICAL CHARACTERISTICS
Bend Radius:
During Installation:
8 X O.D.
Installed: 4 X O.D.
Pull Tension: 25# (110N)
ELECTRICAL CHARACTERISTICS
Conductor DC Resistance @ 20°C (Max):
28.6 Ω/1000 ft (9.38 Ω/100 m)
DC Resistance Unbalance (Max): 5%
Mutual Capacitance @ 20°C (Max): 17 pF/ft (5.6nF/100 m)
Operating Voltage (Max): 300 VDC
Worst Case Cable Skew: 45 ns/100 m
Nominal Velocity of Propagation: 72%