Aquatic RIVIERA MOTIF AI7242M - Manual

Rough-In Plumbing
Measurements
luxury SErIES
Model # AI7242M / AI28AIR7242To (Tub only)
rIvIEra MotIf
42”
3 1/2”
12 1/4”
Deck
Width 3”
Total Width
5 1/2”
SPECIfICatIoNS:
GeneRal SPecIfIcatIonS:
Tub Size 72” x 42” x 23 1/2”
183 cm x 107 cm x 60 cm
Bathing Well 42” long
26” wide
21 1/4” interior depth
Maximum Water Depth 17 1/2”
Shipping Weight 249 lbs. / 113 kg
Tub Weight Filled 1060 lbs. / 481 kg
Tub Only Weight 138 lbs. / 63 kg
Weight w/Equipment 180 lbs. / 82 kg
Gallons to Overflow 106 gal. / 401 L
Gallons to Operate 1 bather: 87 gal. / 329 L
2 bathers: 68 gal. / 257 L
electRIcal SPecIfIcatIonS:
Pump 1.75 HP; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Optional Heater 1.5 kW; 12.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
oPtIonal equIPMent:
•
Chromatherapy LED Lighting
•
Comfort Pillow - Oval or Rectangle
•
Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
• Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
•
1.5 kW Inline Maintenance Heater
•
Lift & Turn Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)
•
Hand Held Jet - Chrome or Polished Brass
•
2 HP, 3-Speed Run-Dry Pump Upgrade
•
Optional Pump Location
•
Remote Pump Location
•
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading fixture manufacturers.
9 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 3 Recessed Rotary Massage Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
aquatic quality features:
- 1.75 HP Run-Dry Pump with 20-Minute Timer
- Bath-Side On/Off Electronic Button
- ”Quiet Pad”
Anti-Vibration Pump Mount for Quiet Pump Operation
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
ul & IaPMo listed, factory tested
limited lifetime Warranty
StandaRd equIPMent:
fax-on-demand
document # 1071
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
Back Angle
22˚
Back Angle
22˚
20 1/4”
72”
42”
21”
23 1/2”
66”
Two Person Bath
November 2007
68” 39 1/2”
4
3 2
1