Powerwinch RC 30 - Manual (Page 4)

RC 23 & RC30 T RAILER W INCHES P OWERWINCH
2
S
PECIFICATIONS
9 1/2”
9”
11 1/2”
Power Socket Light Switch
Clutch Control
Knob
Emergency
Crank Handle
12V Light
Override/Learn
Switch
pwRC005
Set
R elease
Various load conditions affect winch performance. The line pull required for a
specific application depends on the weight of the load, condition of the trailer
rollers, and the degree of the loading ramp incline. The chart below is based on
a single line pull and is provided as a guideline in calculating pulling capabilities.
WARNING
T HE CABLE FASTENERS ON THIS OR ANY WINCH ARE NOT DESIGNED TO HOLD RATED
LOADS INDEPENDENTLY . A LWAYS LEAVE A MINIMUM OF FIVE WRAPS OF CABLE ON THE
DRUM TO ACHIEVE THE RATED LOAD VALUES .
Chart 1. Approximate Rolling Load Capacities (values are in pounds)
% Incline Level 5% 10% 20% 30% 50% 70% 100%
˚ Incline 0˚ 3˚ 6˚ 11˚ 17˚ 26˚ 35˚ 45˚
RC23
24000 13340 10040 6800 5220 3720 3060 2580
RC30
40000 23345 17570 11900 9135 6510 5355 4515
 A 10% incline (6˚) is 1 foot rise in 10 feet.
 To convert from pounds (lbs) to kilograms (kgs) divide by 2.2.
 Capacity can be increased by using a pulley block.
Chart 2. Winch & Boat Capacities (values are in pounds)
Model
Vertical Lift
Capacity Double Line Pull
Approximate
Boat Weight*
Approximate
Boat Size*
RC23
2,400 4300 7500 17-23 Feet
RC30
4000 7500 11500 23-30 Feet
* Boat size and weight is approximate and varies depending on boat type.
When calculating boat weight, use the fully loaded weight that includes boat,
motor, fuel, water, gear etc.
Chart 3. Approximate Rolling Load Capacities (values are in pounds)
Model
Line Speed @
Capacity (FPM) Gear Ratio Voltage
Circuit
Breaker Unit Weight
RC23 14 225:1 12 vdc 60 amps 34 lbs
RC30
8 450:1 12 vdc 60 amps 36 lbs
Noise Level during Operation:
less than 98db (A).