System preparations – Audiovox D2010 User Manual

Page 14

- 13 -

System Preparations

Using of Remote Control

1. Remove the battery holder. Refer to the figure above.
2. Insert the battery into the battery holder (observe correct polarity) and insert the

battery holder into the remote.

3. For best results, aim the remote directly at the player’s IR receiver window, within

15 feet, and angles not exceeding 60 degrees.
The path between the remote control and remote sensor should be free of
obstructions.

4. Under normal use the battery will last for approximately one year.

5. Remove the battery if the remote is not to be used for a long time.
6. Battery type is a CR2025