Penske Racing Shocks 7500-DA User Manual
Page 6
PS‐7500‐DA (Double Adjustable)
2010/2011
6
To Set Ride Height:
Penske Racing Shocks does not set the spring preload on shocks that include coil‐over springs. You must
set your ride height AFTER installing the shocks on the car. After your ride height is set, tighten the 2
Allen screws (3mm Allen) in the spring perch to prevent loosening. This does not need to be tightened
too much – just nip up to prevent damage to the body threads.