Penske Racing Shocks 7500-DA User Manual

Page 12

PS‐7500‐DA (Double Adjustable)

2010/2011

Factory Settings:

Adjusters:

• Typically from the factory we will set the adjusters in the “mid‐range” of the damper. This may

be different depending on specific set ups. It will documented on your build sheet and dyno
sheet what the start settings should be.

• Gas Pressure‐ This can vary depending on application. This could range from 50 psi to 200 psi

depending on what type of vehicle or type of racing. Again this will be specified on your spec
sheet and or dyno sheet.

Full Hard

(C‐0, R‐0)

Full Soft

(C‐40, R‐20)

FACTORY SETTING

(C‐20, R‐10)

FACTORY SETTINGS:

COMPRESSION: =‐20 / REBOUND: ‐10 SWEEPS