MBRP S6050 - Manual (Page 5)

S6150 © 2/13 PAGE 5 OF 5
Figure 14
Installation of MBRP Particulate Filter Back System
6. The Extension Pipe provided is the proper length for the Crew Cab
Long Box and the Extended Cab Long Box. For all other models the
Extension Pipe will need to be shortened. Slide the 4” Clamp onto
the Extension Pipe and install behind the particulate filter. Refer to
Figures 14 & 15.
7. Use the 4” Hanger Clamp to install the Tail Pipe to the Extension
Pipe. Refer to Figure 14. Install the Tail Pipe hanger into the factory
rubber insulator. Refer to Figures 16.Align the Tail Pipe and tighten
the Clamps starting at the front and working rearward to secure the
system.
8. Check along the full length of the exhaust system to ensure there is
adequate clearance for fuel lines, break lines, and any wiring, etc. If
any interference is detected, relocate or adjust to provide adequate
clearance.
Congratulations! You are ready to begin experiencing the improved driving
pleasure of your MBRP Inc. performance exhaust system. We know you will
enjoy your purchase.
Figure 16
Figure 17
Figure 15