Manley BACKBONE Mastering Insert Switcher 2003 - present - Manual (Page 25)

SPECIFICATIONS
Frequency response……………................……. +/- 0.1 dB, 10Hz-100KHz
THD + Noise………………................………... 0.0015% @ +4 dBu input level
0.0011% @ +22 dBu input level
IMD60 4:1…………………………................... 0.0017% @ +4 dBu input level
0.0035% @ +22 dBu input level
Crosstalk Rejection………………................…. ≥ 95dB @ 1 KHz between Gains and Mix-Fade Stages
≥ 70db @ 1KHz at SUM-DIF Stage
Common Mode Rejection
100Hz……………………….............………≥ 100dB
1KHz…………………………….............….≥ 95dB
10KHz………………………..............……..≥ 80dB
Noise floor…………………………................ -95 dBu, Bandwidth 22Hz-22KHz
Maximum signal level………………............... +29dBu
Dynamic Range…………………..............…….124dB
Input impedance………………..............……... 30k ohms
Output impedance……….............……………. 150 ohms
Input Or Output Stepped Gain accuracy…........ +/- 0.05dB
Power Consumption…………….............….….. 60 watts
Mains Fuse……………............................……. 120VAC= 1A; 240VAC= .5A
Use 5mm x 20mm SLO-BLO glass fuses, 250V AC rating
NOTE: Operating mains voltage: Units are purpose built for original destination country’s mains volt-
age (100V, 120V, or 220-240V) as indicated on the serial number badge. The power transformer must be
rewired in order to change mains operating voltage.
Unit Size: 19” x 10” x 3.5” (occuppies 2u) Note: add 5” behind unit for cable allowance
Unit Weight: 13 lbs.
Shipping Weight: 19 dim. (international); 17 lbs. (USA)
Shipping Box Dimensions: 23” x 15” x 9”
Specifications subject to change because they just might.
25