Innovate Motorsports LC-2 - Manual (Page 8)

8
- Calibrate once per race weekend
Dyno use
- Calibrate new sensor
- Calibrate every 2-3 days, depending on usage
5 Software (LogWorks 3 and LM Programmer)
5.1 Download the Logworks 3 software package
1. Open your web browser and go to:
http://www.innovatemotorsports.com/support.php
2. The LogWorks 3 software download will be the very first thing on the
page, click the link to download the software.
5.2 Installing software
1. Double click on the Logworks 3 installer previously downloaded.
2. The installer will start, follow the prompts to install the software.
3. Once the software has been installed the LogWorks software, LM
Programmer and LC-2 manual can then be located by navigating
through Start->Programs->LogWorks3.
5.3 Connecting to LM Programmer
LM Programmer is used to update firmware, change fuel types, and program
the two analog outputs.
1. Connect the OUT port of the LC-2 to the provided serial
programming cable. Connect the other end of the serial
programming cable to your computer. If your computer does not
have a serial port, you can purchase a USB to Serial adapter from