Avocent PS/2 KVM - Manual (Page 12)

Single port PS2 KVM over IP
Step 3
Connect the keyboard to the PS/2 KVM over IP switch console side.
Step 4
Connect the mouse to the PS/2 KVM over IP switch console side.
Step 5
Connect a VGA cable (15-pin HDDB Male / Male) with the Male side to both of the PC and the
host of the PS/2 KVM over IP switch.
Step 6
Connect one end to the PS/2 mouse port on the computer, and the other end to the host PS/2
mouse port on the PS/2 KVM over IP Switch.
Step 7
Connect one end to PS/2 keyboard port on the computer, and the other end to the host PS/2
keyboard port on the PS/2 KVM over IP switch.
Step 8
Connect Ethernet and/or modem, depending how you want to access PS/2 KVM over IP switch
3.2.1 Connecting the External Reset/Power Option
Please refer to the manual of the PS/2 KVM over IP 8/16/32 port external power switch option or
a third party external power option to connect those external devices to one of the serial interface
on the rear side of PS/2 KVM OVER IP. By the date of printing this manual supported options
are: