Fantasea Line F Series RedEye Filter User Manual
Page 4
4
FP7000 Adaptors & Filters Instruction Manual 20110524
d. When mounting the RedEye/PinkEye Filter on the housing lens port,
make sure that the secure string of the color insert is positioned
between the corresponding teeth of the adaptor, so it doesn’t
interfere with proper installation of the filter (image #10).
e. Attach the secure line to the adaptor or filter and the housing, in
order to prevent losing it during the dive.
f. The adaptor and filters can be removed and installed repeatedly
throughout the course of the dive. Make sure that there are no air
bubbles trapped between the housing lens port and lens accessory
before taking images.
g. In order to remove the adaptor or filter from the lens port, gently
push it off, starting from the secure line loop on the right, while
pushing outward with your thumb (image #11). Make sure you are
holding the adaptor or filter with your other hand, so it
doesn’t fall off once removed from the lens port.
h. When removing the adaptor or filter from the housing
lens port, it can be conveniently stored by mounting it
on the EyeGrabber FP7000
(Cat. No. 4057)
. This lens
holder attaches to any standard Flex or Ball & Joint arm
and enables safely securing FP7000 Housing lens
accessories during the dive, making them easily
available for future use. For further information, please visit our
website at
4. Installing Color Correction Inserts inside the EyeDaptor FP7000-F67 or BigEye Lens FP7000
a. Color correction inserts included with the RedEye/PinkEye Filter FP7000 can be installed inside the
EyeDaptor FP7000-F67 or BigEye Lens FP7000 for the purpose of producing vivid and colorful images
or videos while making use of macro and wide angle accessory lenses. A dedicated slot was designed
on these accessories in order to allow for easy installation of red or pink color correction inserts.
Image #8
Image #9
Image #10
Image #11