Ch ap te r 4 - o pe ra ti on s, Room 2 operations – Adcom GFR-700 User Manual

Page 58

r 4 - O

GFR-700 Owner’s Manual

Room 2 Operations

The Room 2 feature makes the GFR-700 a true multi-

tasking device. For example, you can watch a movie

in one room and play a CD in another at the touch

of a button.

To use the Room 2 feature, you must have:

• An ampliﬁer or receiver connected to the Zone 2

Outputs; see page 28.

• A Room 2 input source speciﬁed in the Setup

menu; see page 38.

Activating the Room 2 Output

To activate the Room 2 output:

1 Power on the GFR-700.

2 Select the Room 2 output.

• Press the Rm 2 button on the remote con-

trol.

• Press the Room 2 On/Off button on the front

panel.

3 Power on your Room 2 component.

• Note: The Room 2 component will power on

automatically if you connected it to the Zone

2 12V DC trigger.

4 Adjust the volume.

• If you used the Variable Zone 2 outputs, use

the Volume knob on the GFR-700.

• If you used the Fixed Zone 2 outputs, use the

volume control on your Room 2 component.

Notes:

• The GFR-700 can be in Standby or On modes for

Room Two operation.

Overriding Default Room 2 Settings

You can change the Room 2 input, volume, and mute

settings from the front panel without going through

the main Setup menu:

1 Select the Room 2 Conﬁg menu.

• Press the Room 2 Setup button on the front

panel.

2 Make changes to Room 2 settings.

• Press the Room 2 Setup button repeatedly to

step through each menu item.

• Use the front panel Volume Knob or Up/Down

buttons to select menu options.

3 Menu options include:

• Room 2 (On/Off)

• Mute (On/Off)

• Input (Video 2~4, CD, Tuner AM/FM)

• Volume level (-65 dB to 0 dB)