Ch at pe r 2 - c on ne ct io ns, Am/fm antenna connections, Gfr-700 owner’s manual – Adcom GFR-700 User Manual

Page 14

background image

14

Ch

at

pe

r 2 - C

on

ne

ct

io

ns

GFR-700 Owner’s Manual

AM/FM Antenna Connections

Follow these steps to connect the supplied AM/FM

antennas to the GFR-700.

Connecting the AM Loop Antenna

1 Assemble the antenna.

• Rotate the base until it snaps into place.

2 Connect the antenna.

• Locate the AM antenna inputs.

• Press the lever next to one of the terminals

and insert one of the antenna leads into the

terminal. Release the lever to lock the lead

in place.

• Repeat for the other lead.

3 Position the antenna for best reception.

• To mount the antenna permanently, use

screws through the two holes in the base.

Connecting the FM Antenna

1 Assemble the antenna.

• Connect the supplied adapter to the FM an-

tenna as shown.

2 Connect the antenna.

• Locate the FM antenna input, and securely

attach the FM adapter.

3 Position the antenna for best reception.

• Fully extend the antenna and experiment

with its position to obtain the strongest sig-

nal. You can attach it to a wall or other sur-

face (e.g., using push pins).

• The supplied antenna is for indoor use only.

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��
��
��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

�

�

�

�

�

�

�

��

��

��

��

��

��

�

�

�

�

��

��

��

��

��

��

�

�

�

�

��

��

��

��

��

��

��

��

��

��

�

��

��

��

AM

Antenna

Input

FM

Antenna

Input

AM Loop Antenna

FM Antenna

Adapter

Notes:

• To switch to Tuner mode,

press the Tuner button on the

remote control, or the FM/AM

button on the front panel.

• For Tuner operations, see page

56.