Ch at pe r 2 - c on ne ct io ns, Tv/monitor connections, Gfr-700 owner’s manual – Adcom GFR-700 User Manual

Page 22: Component video out video/ s-video out hdmi out

r 2 - C

GFR-700 Owner’s Manual

TV/Monitor Connections

There are four ways to connect the GFR-700 to a TV,

monitor, or other display device:

• Composite Video

• S-Video

• Component/Progressive Scan Video

• HDMI

Composite Video Connections

1 Using a video cable, connect the Monitor output

on the GFR-700 to the video input on your dis-

play device.

S-Video Connections

1 For higher quality video, use an S-video cable to

connect the Monitor output on the GFR-700 to

the S-video input on your display device.

Component Video Connections

1 Using a Component video cable, connect the

Y/Pb/Pr outputs on the GFR-700 to the corre-

sponding Y/Pb/Pr inputs on your digital display

device.

2 Be sure to match the red, green, and blue con-

nectors accordingly.

HDMI Connections

1 Using an HDMI cable, connect the HDMI output

on the GFR-700 to the corresponding HDMI input

on your digital display device.

2 You must have an HDMI source component to

view HDMI signals on your digital display device.

��

��

��

��

�

��

��
��
��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

�

��

�

��

��

��

��

��

��

�

��

��

• The OSD is not available on

the HDMI output.

• The OSD is always available

on the Composite and S-video

outputs.

• The OSD is always available on

the Component video outputs,

EXCEPT when the input signal

is higher than standard (NTSC/

PAL) resolution. If so, the GFR-

700 switches from standard to

bypass mode and the OSD will

not appear. However, you can

still access the Setup menus

by pressing the Setup button

(which causes the GFR-700

to switch back to standard

mode).

Component

Video Out

Video/

S-Video Out

HDMI

Out

VIDEO 1

DOLBY D

COAXIAL 1

-40.0 dB

On-Screen Display (OSD) Notes: