Cyron Lighting HTP904E - Manual (Page 5)

5
“MODE” button cycles through 14 functions as shown in the diagram. Press of
a button is confirmed by a short fast blink of the Indicator Light. “PAUSE”
button will stop the color transition in any of the color transition or color fade
modes.
Optional Settings
Turn LED System ON when an outlet is switched on: Plug the power supply to
a switched power source such as audio receiver’s “Switched Power” or wall
outlet that is controlled by a wall switch. Make sure the outlet is switched on.
Turn off the system using the POWER button. Press and hold the MODE
button for 3 seconds. Now the unit will turn on automatically every time the
outlet is turned on.
LED System remains OFF when an outlet is switched on: In a similar process,
press and hold the PAUSE button for 3 seconds. The system will remain off
every time the outlet is switched on. In this mode, the system can only be
turned on from the controller by pressing the POWER button.